HIKVISION HiLook Series Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk DVR HIKVISION HiLook Series. HIKVISION HiLook Series 18 halaman. Smart hybrid light bullet & turret camera
Juga untuk HIKVISION HiLook Series: Panduan Memulai Cepat (18 halaman), Panduan Pengguna (18 halaman), Panduan Pengguna (14 halaman), Panduan Pengguna (20 halaman), Panduan Pengguna (13 halaman), Panduan Pengguna (17 halaman)

1). Rotate the enclosure to adjust the pan position

[0° to 360°].

2). Move the main body up and down to adjust the

tilt position [0° to 75°].

3). Rotate the main body to adjust the rotation

position [0° to 360°].

2.2.2 Ceiling Mounting with Junction Box

Before you start:

You need to purchase a junction box in advance.

Steps:

1. Loosen screws to take apart the junction box.

2. Paste the drill template for junction box to the

installation location.

3. (Optional) For cement ceiling, drill the screw holes

with a 5.5 mm drill and insert the supplied wall

plugs.

4. (Optional) Drill the cable hole, when the cables are

routed through the ceiling.

5. Secure the junction box body on the ceiling with

four PA4 × 25 screws according to the actual object.

Figure 2-9 Secure Junction Box Body

6. Fix the base to the junction box cover with three M4

× 10 screws.

Figure 2-10 Fix Base to Junction Box Cover

7. Fix the junction box cover to the junction box body

with three M3 screws.

Figure 2-11 Fix Junction Box Cover to Junction Box Body

8. Route the cables through the bottom cable hole or

the side cable hole of the junction box.

9. Refer to step 6 of 2.2.1

Junction Box

installation.

2.2.3 Wall Mounting

Before you start:

You need to purchase a wall mount in advance.

Steps:

to adjust the angle and finish the

Figure 2-12 Finish Installation

Ceiling Mounting without