AirGuard 7346 Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Peralatan Pertanian AirGuard 7346. AirGuard 7346 5 halaman. Seed brakes

REQUIRED TOOLS

Be sure to have the following tools and parts available before

you begin your initial installation.

• Hose Cutter or Strong Utility Knife

• Flat Head Screw Driver or Power Drill with Nut Driver

• Silicone Applicator Gun

• All-Weather Silicone (must be rain-ready and sun/freeze proof

• Shop Towels

• 6" long piece of Air Seeder Hose

• Wind Meter

INSTALL IN 6 STEPS

STEP 1

Choose a location on your drill to install the Seed Brakes. There are many places for installation, at the manifolds,

or between the frame and the opener. If you install at the manifolds, note that sags in the hose or longer hose

lengths may cause plugging issues with lower air speeds. For most drills, it is recommended placing the Seed

Brakes 6-12" above the opener. Ensure that the Seed Brake will not interfere with the trip mechanism or

hit the bottom of the drill frame when the trip is engaged. If the brake has to be placed further up the

hose, for proper clearance, ensure there are no dips on the hose after the brake.

SUPPLIED PARTS:

1 Seed Brake

SABRE

Clamps

3 Adapters (optional)