Alirac ECL-160 Panduan Pengoperasian - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem Pengelasan Alirac ECL-160. Alirac ECL-160 16 halaman.

2 Safety

* The user must comply with occupational safety and health rules and wear

appropriate labor protective equipment. Try to avoid injury on eye and skin.

* It is safe to cover your head with face mask while welding, only do the observation

on the arc through the window of the mask.

* Don't expose any part of the body at the same time to the welding positive and

negative output terminals without insulated protection.

* ECL Inverter DC Arc welder is a kind of electronic product which makes its

components more easily damaged. While replacing or modulating, the strength should

not be too much in order to avoid causing damage to the device.

* Check the connection to see if it is correct or reliable each time before working.

Besides, ensure the grounding outlet device correct.

* While using, as smoke is harmful to human's health, the operation must be carried

out in the ventilation and exhaust facilities.

* Prohibit non-professionals to change or replace the welder.

* Since the welder owns strong electromagnetic and radio frequencies, the people

with cardiac pacemakers affected by the interference electromagnetic, electrical

frequency are not allowed to stay nearby.

* When it works, please pay attention to its rated duty cycle. Do not overload.

* In some areas, where something may fall from the sky, personal safety precaution

should be taken.

* In some areas around construction site, something like the dust, acid, corrosive

gases or other substance in the air can nor exceed the standard value except those