Alirac HE115-125/950 Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penggiling Alirac HE115-125/950. Alirac HE115-125/950 10 halaman.

Halaman Cetak

or against your body is unstable and may

lead to loss of control.

16.Do not force tool. Use the correct

tool for your application. The correct tool

will do the job better and more safely at the

rate for which it is designed.

17.Do not use tool if switch does not

turn on or off. Any tool that cannot be

controlled with the switch is dangerous and

must be repaired.

18.Disconnect the plug from the power

source before making any adjustments,

changing accessories, or storing the tool.

Such preventing safety measures reduce the

risk of starting the tool accidentally.

19.Store idle tools out of reach of

children and other untrained persons. Tools

are dangerous in the hands of untrained

users.

20.Maintain tools with care. Keep

cutting tools sharp and clean. Properly

maintained tools with sharp cutting edges are

less likely to bind and are easier to control.

21.Check for misalignment or binding

of moving parts, breakage of parts, and

any other conditions that may affect the

tools operation. If damaged, have the tool

serviced before using. Many accidents are

caused by poorly maintained tools.

22.Use

only

recommended by the manufacturer for your

model. Accessories that may be suitable for

one tool, may become hazardous when used

on other tools.

SERVICE

23.Tool service must be performed

only by qualified repair personnel. Service

or maintenance performed by unqualified

personnel can result in a risk of injury.

24.When serving a tool, use only

accessories

that

are

identical

replacement

instructions in the Maintenance section of

the manual. Use of unauthorized parts of

failure to follow Maintenance instructions

may create a risk of electric shock or injury.

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with

product (gained from repeated use) replace

strict adherence to grinder safety rules. If

you use this tool unsafely or incorrectly, you

can suffer serious personal injury.

1.Always

use

grinding wheel. A guard protects operator

from broken wheel fragments.

2.Accessories must be rated for at least

the speed recommended on the tool warning

label. Wheels and other accessories running

over rated speed can fly apart and cause

injury.

3.Hold tool by insulated gripping

surface when performing and operating

where the cutting tool may contact hidden

wiring or its own cord. Contact with a "live"

make exposed metal parts of the tool "live"

and shock the operator.

4.When using depressed center grinding

wheels, be sure to use only fiberglass

reinforced wheels.

5.Always use safety glasses or goggles.

Ordinary eye or sun glasses are NOT safety

glasses.

6.Check the wheel carefully for cracks or

damaged before operation. Replace cracked

or damaged wheel immediately. Run the tool

(with guard) a no load for about a minute,

holding tool away from others. If wheel is

flawed, it will likely separate during this test.

7.Use only flanges specified for this tool.

8.Be careful not to damage the spindle,

-2-

www.makute.com

parts.

proper

guard

with