Alisun Sun lounge Salsa 10 Panduan Teknis - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Teknis untuk Lentera Alisun Sun lounge Salsa 10. Alisun Sun lounge Salsa 10 14 halaman.

Halaman Cetak

ACRYLIC SHEET

The acrylic sheet should only be removed

when the equipment is at room

temperature.

Should you need to remove the acrylic

sheet, you must proceed as follows:

Remove the plug from the power

socket.

Unscrew the 4 screws (A) in the end

piece (B).

Slide the end piece out of the canopy.

Repeat this procedure with the end

piece at the other end of the equipment.

Now rotate the canopy as far as it will

go, so that the lamps are facing

upwards.

Carefully free one side of the acrylic

sheet (A) by pulling it out of the plastic

profile (B).

Now pull the acrylic sheet towards you

such that it slides out of the plastic

profile at the other side.

When replacing the acrylic sheet, proceed

as follows:

Slide the acrylic sheet into the groove in

the plastic profile at one side.

Press down on the centre of the acrylic

sheet then slide its free edge into the

groove in the plastic profile on the other

side.

Next rotate the canopy all the way

back, such that the lamps are facing

downwards again.

Now fit both end pieces using the 4

screws.

PARTS

Use only original Alisun replacement parts:

Part

Brilliant Sun plus XT 100W

GoldSun DuoTan®

Professional 100W

Reflector Salsa 10/12

Timer

This equipment's mains lead may only be

replaced by authorized personnel.

Art.no.

350377

350366

332220

355005