alkitronic H Series Panduan Pengoperasian dan Pemeliharaan - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Pemeliharaan untuk Alat Listrik alkitronic H Series. alkitronic H Series 16 halaman. Hydraulic torque wrench
Halaman Cetak
Operation and Maintenance Manual
Procedure:
• Press the push button (1) and hold it down. Pull the square
drive (2) out of the housing. Remove the push button.
• After the exchange, put it together in the reverse order
and secure the square drive (2) with the push button (1)
again.
• Check that the push button is firmly connected to the
insert.
Push button
Push button (1)
After replacements, check inserts or adapters are
properly secured. Otherwise serious personal inju-
ries or damage to the tool may occur.
3.5 Preparing for bolting - alkitronic® H-AX
Assembling the alkitronic® H-AX
• Select the H-AX hexagon link (1) corresponding to the
joint. Make sure the hexagon link is suitable for the drive
unit (2). Do not use the hexagon links of any other tools.
• Push the H-AX drive unit without twisting into the hexa-
gon link up to the stop. By inserting the standard link bolt
(3) completely both parts of the tool are firmly connected
and secured.
Standard-link bolt (3)
H-AX-link (1)
2
1
Square drive AVS (2)
Assembly
H-AX-drive unit (2)
Changing the hexagon link
• Remove the link bolt (3) and pull the drive unit out (2) from
the hexagon link.
• Assembly as described above.
Standard-link bolt (3)
To reduce the spanner width, an optional alkitronic®
STA (5) can be used in the hexagon link drive.
Setting the rotation (tightening/loosening)
• The rotation is changed by reversing the alkitronic® H-AX
Torque Wrench by 180
the housing of the hexagon link.
Reaction
moment
Rotation CW
Tighten
3.5.1 Support of reaction moment / Support points
A safe and stable counter mounting is essential.
Improper support may lead to damage to the tool
or injury to the operator due to high reaction forces
generating from the tool.
Place the reaction surface (1) of the H-AX hexagon link (Fig. 3)
against an adjacent nut, flange or solid system component.
8
H-AX-Drive unit (2)
alkitronic® STA (5)
. The bolting direction is marked at
0
Reaction
moment
Rotation CCW
Loosen