Garmin GTX 345 Panduan Operator - Halaman 27
Jelajahi secara online atau unduh pdf Panduan Operator untuk Radio Kelautan Garmin GTX 345. Garmin GTX 345 28 halaman. Enstrom 480b ads-b transponder
Juga untuk Garmin GTX 345: Panduan Pilot (34 halaman), Panduan Operator (28 halaman)
Halaman Cetak
UNCONTROLLED COPY WHEN DOWNLOADED OR PRINTED
Key
FUNC
CRSR
CLR
ENT
0-7
8▲
9▼
Report No. 28-AC-078
This electronic document is not linked to a subscription for revision control or distribution. Refer to the Optional Equipment
Supplement Publications Status link under the Technical Support Page of the Enstrom Helicopter website for the current revision
ENSTROM 480B RFM SUPPLEMENT
Function
FUNC: Cycles through the four menu groups.
o Press the FUNC key to access a menu group
(transponder, timers, altitude, and system).
CRSR: Removes the cursor and cancels the code
entry.
o Press the CRSR key when entering the code.
(The last code entered is retained.)
CLR: Moves the cursor or cancels the code entry.
o Press the CLR key to move the cursor back to
the previous digit.
o Press and hold CLR key to move the cursor
back to the first digit.
o When the cursor is on the first digit, press
the CLR key to remove the cursor and cancel
the code entry. (The last code entered is
retained.)
ENT: Acknowledges menu item and pilot data
entry selections and controls timer start/stop
and altitude monitoring on/off operation.
0-7: Enters the squawk code.
Press the 0-7 keys to enter the code. The
o
new code is activated when the fourth
digit is entered.
8▲: Enters the number eight in Flight ID or
Count Down timer.
Press 8▲ to enter number eight.
o
Press 8▲to navigate up and between the
o
functions and settings within a menu
group.
9▼: Enters the number nine in Flight ID or
Count Down timer.
Press 9▼ to enter number nine.
o
Press 9▼ to navigate down and between
o
the functions and settings within a
menu group.
level of this Rotorcraft Flight Manual Supplement.
7-7
Dec 3/18