Brother PDS-6000 Panduan Pengaturan Cepat - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Semua dalam Satu Printer Brother PDS-6000. Brother PDS-6000 18 halaman.
Juga untuk Brother PDS-6000: Panduan Memulai Cepat (15 halaman)

Halaman Cetak

Product Safety Guide

WARNING

The unit should be connected to an AC power

source within the range indicated on Specifications

in the User's Guide. DO NOT connect it to a DC

power source or inverter. Doing this might cause

an electrical shock or a risk of fire. If you are not

sure what kind of power source you have, contact

a qualified electrician.

This product must be installed near an AC power

outlet that is easily accessible. In case of an

emergency, you must unplug the power cord from

the AC power outlet to shut off the power completely.

IMPORTANT

• Brother cannot accept any financial or other

responsibilities that may be the result of your

use of this information, including direct, special

or consequential damages. There are no

warranties extended or granted by this

document.

• This machine has been certified to comply with

FCC standards, which are applied to the USA

only.

• Changes or modifications not expressly

approved by Brother Industries, Ltd. could void

the user's authority to operate the equipment.

DO NOT expose the unit to direct sunlight,

excessive heat, open flames, corrosive gasses,

moisture or dust.

DO NOT place the unit on a carpet or rug, as this

will expose it to dust. Exposing the unit to dust may

create a risk of an electrical short or fire. It may

also damage the unit and/or render it inoperable.

DO NOT place the unit near heaters, air

conditioners, electric fans, refrigerators, radiators,

or water. Doing so may create the risk of a short

circuit or fire should water come into contact with

the unit (including condensation from heating, air

conditioning, and/or ventilation equipment that

may be sufficient to create a short circuit or fire).

DO NOT place the unit near chemicals or in a

place where chemicals could be spilled on it.

Should chemicals come into contact with the unit,

there may be a risk of fire or electric shock. In

particular, organic solvents or liquids such as

benzene, paint thinner, polish remover, or

deodorizer may melt or dissolve the plastic cover

and/or cables, resulting in a risk of fire or electric

shock. These or other chemicals may also cause

the unit to malfunction or become discolored.

The product should be placed so as not to come into

contact with any wall or other device. Otherwise, it

could create a risk of overheating and/or fire.

Instead:

• Place the unit on a solid surface, never on a

bed, sofa, rug, or other similar soft surface.

CAUTION

Avoid placing the unit in a high-traffic area. If you

must place it in a high-traffic area, ensure that the

unit is in a safe location where it cannot be

accidentally knocked over, which could cause

injury to you and serious damage to the unit.

Ensure that cables and cords leading to the unit

are secured so as not to pose a tripping hazard.

DO NOT place the unit on an unstable or tilted

cart, stand, table or on any tilted/slanted surface.

The machine is heavy and may fall, causing injury

to you or others and serious damage to the unit.

Make sure that no part of the unit protrudes from

the desk or stand where the unit is located. Make

sure that the unit is located on a flat, level, and

stable surface free from vibration. Failure to

observe these precautions could cause the unit to

fall, causing injury to you or others and serious

damage to the unit.