LG 19MB35P-I.AUB Panduan Pemilik - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Monitor LG 19MB35P-I.AUB. LG 19MB35P-I.AUB 29 halaman.

ASSEMBLING AND PREPARING

Adjusting the stand height

Place the monitor mounted on the stand base

in an upright position.

Remove the tape attached at the bottom rear

of the stand body, then pull out the locking

pin.

Stand Body

The height can be adjusted up to 110 mm(4.33

inches).

CAUTION

Once the pin is removed, it is not necessary

to re-insert it to adjust the height.

WARNING

Do not put your finger be-

tween the screen and the

base (chassis) when adjust-

ing the screen's height.

Tape

Locking Pin

110 mm(4.33 inches)

Using the Kensington locking

device

The connector for the Kensington lock is located

on the rear of the monitor.

For more information on installation and usage,

refer to the Kensington lock user manual or visit

the website at http://www.kensington.com.

Connect the monitor to the table with the Kensing-

ton lock cable.

NOTE

Using the Kensington lock is optional. The

accessories can be purchased at your local

electronics store.