LG 20MP48AB Panduan Pemilik - Halaman 32
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Monitor LG 20MP48AB. LG 20MP48AB 46 halaman. Ips led monitor
Juga untuk LG 20MP48AB: Panduan Pemilik (47 halaman)
Halaman Cetak
32
TROUBLESHOOTING
CAUTION
Check Control Panel ► Display ► Settings and see if the frequency or the resolution were
y
y
changed. If yes, readjust the video card to the recommend resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the
y
y
screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.
The setting method can differ by computer and O/S (Operation System), and resolution mentioned
y
y
above may not be supported by the video card performance. In this case, please ask to the computer
or the video card manufacturer.
Display image is incorrect
The screen color is mono or
abnormal.
The screen blinks.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
Have you installed the display
driver?
20MP48HB
22MP48HQ 23MP48HQ 24MP48HQ 27MP48HQ
The screen is flickering.
Did you select the recommended
resolution?
y Check if the signal cable is properly connected and use a screwdriver
to fasten if necessary.
y Make sure the video card is properly inserted in the slot.
y Set the color setting higher than 24 bits (true color) at Control Panel
► Settings.
y Check if the screen is set to interlace mode and if yes, change it to the
recommend resolution.
y Be sure to install the display driver from the display driver CD (or
diskette) that comes with your display. Or, you can also download the
driver from our web site: http://www.lg.com.
y Make sure to check if the video card supports Plug&Play function.
y If the selected resolution is HDMI 1080i 60/50 Hz, the screen may
be flickering. Change the resolution to the recommended resolution
1080P.