Brother P-Touch 2300 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Brother P-Touch 2300. Brother P-Touch 2300 20 halaman.

A single TZ tape cassette is supplied with this unit. However, since TZ tape cassettes are avail-

able for this machine in a wide variety of colors and sizes, it is possible to make distinctive

color-coded and stylized labels.

In addition, this machine has been designed to allow you to change the tape cassettes quickly

and easily.

To change the tape cassette:

1 Lift open the tape compartment cover. The installed cassette is also released.

2 If a tape cassette is already installed, remove it by pulling it straight up.

3 If the ink ribbon in the other tape cassette is loose, use your finger to wind the toothed

wheel in the direction of the arrow on the cassette until there is no slack in the ribbon.

Also, make sure that the end of the tape feeds under the tape guides.

If you are using a new tape cassette provided with a stopper, be sure to remove the

stopper.

4 Insert the tape cassette firmly into the tape compartment, making sure that the entire back

of the cassette touches the bottom of the compartment.

When inserting the tape cassette, make sure that the inner ribbon does not catch on

the corner of the metal guide.

5 Close the compartment cover, then turn on the machine if it is off.

6 Hold down c and press _ once to advance the tape and remove any slack.

TAPE CASSETTE