Brother P-Touch D400 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Brother P-Touch D400. Brother P-Touch D400 33 halaman.

GETTING STARTED

NOTE

• When using AC adapter (AD-E001):

Insert the plug on the adapter cord into the AC adapter socket on

the side of the machine.

Insert the plug into the nearest standard electrical outlet. For

memory back up, we recommend using AA alkaline batteries (LR6)

or Ni-MH batteries (HR6) together when using the AC adapter.

• To safeguard and backup the P-touch's memory, when the AC

adapter is unplugged it is recommended to have AA alkaline batteries

(LR6) or Ni-MH batteries (HR6) installed in the P-touch.

• When power is disconnected for more than two minutes, all text and

format settings will be cleared. Any text files stored in the memory will

also be cleared.

• Remove the batteries if you do not intend to use the P-touch for an

extended period of time.

• Dispose of the battery at an appropriate collection point, not in the

general waste stream. In addition, be sure to observe all applicable

federal, state, and local regulations.

• When storing or discarding the battery, cover both ends of the battery

with cellophane tape, to prevent it from short-circuiting.

(Battery insulation example)

1. Cellophane tape

2. Alkaline or Ni-MH battery

USING A COMBINATION OF DIFFERENT BATTERIES (SUCH AS Ni-MH AND

ALKALINE), MAY RESULT IN AN EXPLOSION.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Insert a Tape Cassette.

Print head

Tape cutter lever

Tape compartment cover

Power Supply and Tape cassette

CAUTION

Tape cassette

compartment

Release lever

Tape cutter

Tape exit slot

Keyboard

LCD display