Brother P-touch PT-P900 Panduan Keamanan Produk - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Keamanan Produk untuk Pembuat label Brother P-touch PT-P900. Brother P-touch PT-P900 15 halaman. Electronic

Halaman Cetak
Rechargeable Li-ion battery (Optional)
A liquid (electrolyte) leaking from the P-touch Label Printer or rechargeable battery may indicate
that the rechargeable battery is damaged. If the rechargeable battery leaks, immediately stop
using the P-touch Label Printer, unplug the AC adapter, and isolate the P-touch Label Printer by
placing it in a bag.
DO NOT touch the electrolyte. If the electrolyte gets in the eyes, do not rub them. Immediately
rinse the eyes liberally with tap water or other clean water and seek the advice of a medical
professional. If left unattended, the electrolyte could cause eye damage. If the electrolyte comes
into contact with your skin or clothing, immediately rinse them with water.
DO NOT put the rechargeable battery, or a P-touch Label Printer with the rechargeable battery
installed, into a microwave oven or high-pressure container.
DO NOT disassemble, modify, or attempt to repair the rechargeable battery.
DO NOT dispose of the rechargeable battery in fire or intentionally overheat. This could cause
the internal insulation to melt, gas to be emitted, or safety mechanisms to fail. Additionally, the
electrolyte solution could catch fire.
DO NOT puncture the rechargeable battery with any objects, subject it to severe shocks or
throw it. Damage to the rechargeable battery's protection circuit could cause the rechargeable
battery to be recharged at an abnormal current/voltage or cause an abnormal chemical reaction
within the rechargeable battery.
DO NOT leave a drained rechargeable battery in the P-touch Label Printer for a long period of
time. This could shorten the life of the rechargeable battery or lead to an electrical short.
DO NOT incinerate the rechargeable battery or dispose of it with household waste.
If the P-touch Label Printer can only be used for a short period of time, even though the
rechargeable battery is fully charged, the rechargeable battery may have reached the end of its
service life. Replace the rechargeable battery with a new one. When removing and replacing the
rechargeable battery, cover the terminals of the old rechargeable battery with tape to avoid creating
a short in the battery.
P-touch Label Printer
Follow these guidelines to avoid a fire, electrical shock, the risk of injury to yourself or others, and damage
to the P-touch Label Printer or other property.
DO NOT touch any metal parts near the print head. The print head becomes very hot during and
immediately after use. DO NOT touch it directly with your hands.
4
DANGER
WARNING