Brother PT-MT Panduan Servis - Halaman 29
Jelajahi secara online atau unduh pdf Panduan Servis untuk Pembuat label Brother PT-MT. Brother PT-MT 45 halaman.
Juga untuk Brother PT-MT: Daftar Referensi Bagian (14 halaman)
Halaman Cetak
[ 4 ]
Installing the Chassis ASSY
(1) If the chassis ASSY has been disassembled, assemble the components, referring to
page III-16.
(2) As shown in Figure 3.2-10, fit the cutter lever onto the shaft on the chassis ASSY.
(3) Put the chassis ASSY together with the cutter lever back into the bottom cover.
NOTE: Route the head flat cable as illustrated below.
(4) Secure the chassis ASSY with three screws.
(5) Solder the motor lead wires to the main PCB as shown below.
NOTE: Check the wire ID colors, then solder the black and red wires to the BLACK
( ) and RED (+) points, respectively.
Figure 3.2-7 Installing the Chassis ASSY and Soldering the Motor Lead Wires
III - 14