Fujitsu ScanSnap iScanner fi-6010N Panduan Memulai - Halaman 29

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Pemindai Fujitsu ScanSnap iScanner fi-6010N. Fujitsu ScanSnap iScanner fi-6010N 45 halaman. Network adf scanner
Juga untuk Fujitsu ScanSnap iScanner fi-6010N: Spesifikasi (2 halaman), Panduan Memulai (21 halaman), Brosur & Spesifikasi (2 halaman), Panduan Memulai (21 halaman), Petunjuk Pembersihan (2 halaman), Petunjuk Pembersihan (2 halaman)

If some other error occurs

Message

An error has occurred. Try turning the power off

and back on again. If the problem reoccurs after

restarting, try disconnecting the scanner power

cord, reattaching it, and restarting again. If the

problem still persists, the administrator should

contact the FUJITSU scanner dealer or an autho-

rized FUJITSU scanner service provider for

help. [alphanumeric eight digits]

Action

Try the following:

If the scanner does not restart automatically,

press the [Shutdown] button on the "Login"

screen to turn the power off, and turn the

power back on again to restart the scanner.

If the error status persists after the scanner is

restarted, press the [Shutdown] button on the

"Login" screen, disconnect the AC cable

from the scanner to turn the power off, wait

for at least 10 seconds, then reconnect the

AC cable and try turning the power back on

again. If the error status persists, contact

your FUJITSU scanner dealer or an

authorized FUJITSU scanner service

provider.