Fujitsu ETERNUS DX Disk Panduan Konfigurasi - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Penyimpanan Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 28 halaman. Server connection, fcoe for linux driver settings for converged network adapter cards
Juga untuk Fujitsu ETERNUS DX Disk: Panduan Pengguna (35 halaman), Panduan Pengguna (42 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (28 halaman), Panduan Konfigurasi (29 halaman), Panduan Konfigurasi (25 halaman), Panduan Konfigurasi (32 halaman), Panduan Konfigurasi (35 halaman), Panduan Konfigurasi (31 halaman), Panduan Konfigurasi (43 halaman), Panduan Konfigurasi (21 halaman), Panduan Konfigurasi (24 halaman)

Halaman Cetak

Fujitsu ETERNUS DX Disk Panduan Konfigurasi

1. Hardware

Chapter 6

Installing the iSCSI Software Initiator and Setting Up the Server

6.2

Setting Up the Server

6.2.4

Server Settings when CHAP Authentication is Used

To use CHAP authentication, the following items must be set for the iSCSI ports of the ETERNUS DX and for

the iSCSI Initiators.

When setting the iSCSI port parameters for the ETERNUS DX, specify the "-I" option and input the IP address.

When setting the iSCSI Initiator parameters, do not specify the "-I" option.

CHAP Method

•

Initiator CHAP Name

•

CHAP Secret

•

Set the CHAP Method.

The CHAP authentication method (unidirectional or bidirectional) must be set.

Set the CHAP Method value indicated in the following table:

CHAP authentication method

Unidirectional CHAP authentication

Bidirectional CHAP authentication

Use the "iscsiutil" command to set the CHAP Method.

# iscsiutil [iscsi-device-file] -u

Example:

To set unidirectional CHAP authentication for the ETERNUS DX whose iSCSI port IP address is

192.1.1.120

# iscsiutil -u -H CHAP_UNI -I 192.1.1.120

Set the Initiator CHAP Name.

An Initiator CHAP Name must be set for each target set in

17). The Initiator CHAP Name set here must match the Initiator CHAP Name that is to be set for Target.

Use the "iscsiutil" command to set the CHAP Method.

# iscsiutil [iscsi-device-file] -u -N <chap-initiator-name>

Example:

To set "mychapname" as the CHAP name for a specific target (192.1.1.120):

# iscsiutil -u -N mychapname -I 192.1.1.120

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (iSCSI) for HP-UX

-H <chap-authentication-type>

[-T <target-name> [-I <ip-address>] [-P <tcp-port>]

[-M <portal-grp-tag>]]

CHAP Method setting

CHAP_UNI

CHAP_BI

Step 4

"6.2.3 iSCSI Basic Settings" (page

P3AM-3402-14ENZ0