AEG ProSense LF694ABC Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin cuci AEG ProSense LF694ABC. AEG ProSense LF694ABC 40 halaman.

The end of the drain hose must always

be ventilated , i.e. the inner diameter of

the drain pipe (min. 38 mm - min. 1.5")

must be larger than the external diameter

of the drain hose.

4. If the end of the drain hose looks like this

(see the picture), you can push it directly

into the stand pipe.

5. Without the plastic hose guide, to a

sink spigot - Put the drain hose in the

spigot and tighten it with a clamp. Refer

to the illustration.

Make sure that the drain hose makes a

loop to prevent particles going into the

appliance from the sink.

6. Position the hose directly to a built-in

drain pipe in the room wall and tighten

it with a clamp.

5.6 Electrical connection

At the end of installation you can connect the

mains plug to the mains socket.

The rating plate on the inner edge of the

appliance door and the 'Technical Data'

chapter indicate the necessary electrical

ratings. Make sure that they are compatible

with the mains power supply.

Check that your domestic electrical

installation can take the maximum load

required, also taking into account any other

appliances in use.

Connect the appliance to an earthed

socket.

The power supply cable must be easily

accessible after installing the appliance.

For any electrical work required to install this

appliance, contact our Authorised Service

Centre.

The manufacturer does not accept any

responsibility for damage or injury through

failure to comply with the above safety

precaution.

ENGLISH