Fujitsu SLR 100 GBYTE Panduan Pengoperasian - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penyimpanan Fujitsu SLR 100 GBYTE. Fujitsu SLR 100 GBYTE 21 halaman.

SLR 25/50 Gbyte

Using write protection

Write protection should be enabled whenever you wish to protect the tape from accidental

overwriting or deletion.

When the tape cartridge is write-protected, the system can read data, but can neither overwrite nor

delete data.

The write protection facility consists of a screw with an arrow. If you turn the screw by means of a

screwdriver, the write protection is enabled or disabled.

If the arrow points to this symbol, the cartridge is not write-protected.

If the arrow points to this symbol, the cartridge is write-protected.

Cleaning

To guarantee error-free data processing, cleaning of the write/read heads is requested by the drive

via the "Fault" indicator on a regular basis after approximately 50 hours of tape operation. The

cleaning prompt may also be made sooner if the write/read heads are particularly soiled.

Only use cleaning cartridges (dry cleaning) of the type "TDS DPCC 6000" (for where to

order, see the section

Do not carry out wet cleaning!

10 - English

"Handling magnetic tape

cartridges").

A26361-H583-Z100-1-7419