Indesit WIL 1000 OT Panduan Servis - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Servis untuk Mesin cuci Indesit WIL 1000 OT. Indesit WIL 1000 OT 21 halaman. 2005 on time

Indesit WIL 1000 OT Panduan Servis

4. TECHNICAL ASSISTANCE:

4.1. DEMO MODE:

Demo Mode is not available in these models.
4.2. AUTO TEST:
The washing machine On Time lets the user know the occurrence of a Fault through a quick flash of the
DOOR LOCK LED, but it does not show the fault code on the control panel.
To visualize the type of fault, it is necessary to start Auto Test, using the Hardware Key, whose display
shows the code of the fault occurred.

AUTO TEST (TESTING / RUNNING-IN):

The Hardware Key permits the execution of the platform EVO II Auto Test program.
On the hardware key switches on a BLUE LED, indicating it is an EVO II washing machine. A flashing
RED led on the key (when it is connected with the appliance) indicates that the electronic board is
communicating with the hardware key.
If the hardware key does not succeed in connecting with the washing machine, the message "ERR" will
flash on the display
Initial conditions to start Auto Test:
1. Washing machine without water in the tank.
2. Door closed.
3. Switch on the washing machine and fit the key on the suitable housing.
To start the AUTO-TEST program press and leave the button marked as AUTO-TEST. A sound-signal
will be given out and on the display will slide the writing "AUTO-TEST".
Auto Test sequence for washing machines and washer dryer
- Loading of wash solenoid valve for 10" ca.
- Loading of pre-wash solenoid valve for 10" ca.
- Loading of hot water solenoid valve for 10" ca (in machines equipped with this solenoid valve).
- Motor movement on both directions.
- Activation of the wash heater: warming up to the temperature of 30¡C.
- Drain and spin.
- Stop.
NOTICE!! If now the washing machine works correctly, but previously has had a FAULT, it will not start up
the AUTO-TEST program, but such a FAULT will be surely shown on the display of the hardware key. In this
case, to start up the "Auto-test" program is necessary to remove the hardware key.
Service Manual
WM ONTIME - 2005
Edition
2005.07.04
G
Language
English
B
11