AEG LAVATHERM T56830 Informasi Pengguna - Halaman 18

Jelajahi secara online atau unduh pdf Informasi Pengguna untuk Pengering AEG LAVATHERM T56830. AEG LAVATHERM T56830 33 halaman. Condensation dryer
Juga untuk AEG LAVATHERM T56830: Informasi Pengguna (33 halaman)

Halaman Cetak

Clean the entire filter area

The strainer area does not have to be cleaned after every drying cycle,

but should be checked regularly and cleaned of fluff if necessary.

6. To do this, grip the top of the large

mesh filter and pull it forwards

until it comes loose from the two

brackets.

7. Remove fluff from the entire filter

area. It is best to use a vacuum

cleaner for this purpose.

8. Press both journals of the large

mesh filter into the brackets on the

loading door until they snap into

place.

9. Re-insert fine strainer.

10. Press against the large mesh filter

until it locks into the interlock.

If the fine strainer is not fitted,

the large mesh filter will not snap

into place and the loading door

cannot be closed.

Cleaning the door seal

Wipe the door seal with a damp cloth immediately after the drying cycle

has finished.