Acanac CBN8000 Setup Manual - Halaman 2
Jelajahi secara online atau unduh pdf Setup Manual untuk Modem Acanac CBN8000. Acanac CBN8000 2 halaman. Modem and deco wi-fi 6 pod
Juga untuk Acanac CBN8000: Setup Manual (2 halaman)
Halaman Cetak
Setting Up Your High Speed Internet Service and Wi-Fi Network
Before you begin:
>
Review the contents of your install kit:
•
Coax cable to connect to the network
•
CBN modem and power cord
1
Connect one end of the Coax Cable to the Cable port on your
modem, then connect the other end to a nearby coax wall
outlet.
2
Place your Wi-Fi pod next to your internet modem.
Using the Ethernet Cable provided, connect one end to LAN
Port 1 on your modem and the other end to a port on your
Wi-Fi pod.
For help changing your Wi-Fi Network (SSID) name or Wi-Fi password and for additional security tips visit Acanac.com/support.
•
Deco M5 Wi-Fi Pod and power cord
•
Ethernet cable for your Wi-Fi pod
•
Ensure you follow the steps in order shown
3
Attach the Power Cord to the Power Port on your
modem, then plug the cord into a nearby power outlet.
Connect your Wi-Fi pod to a Power Outlet.
The Wi-Fi pod light will turn solid green. This can take
about 5 minutes.
(Do not use LAN Port 2
of the modem.)
Power Ports
Tip:
If the light is Red, reset the modem
and pod by unplugging the power adaptors.
Wait 30 seconds, plug in the modem.
Wait 30 seconds, plug in the pod.
>
Additional Resources:
You can find additional self-help resources at
Acanac.com/support.
4
Go to Wi-Fi settings on a device you would like to connect, and
search for available Wi-Fi networks. Select the Wi-Fi Network
(SSID) and enter the password that matches those found on
the bottom of your Deco M5 Wi-Fi pod.
Wi-Fi Network (SSID): Acanac12345
Password: 1234567891012
That's it, you should now be ready to
enjoy your Acanac Wi-Fi!