ab Solares Smart Spa Panduan Instalasi - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Bak Mandi Air Panas ab Solares Smart Spa. ab Solares Smart Spa 17 halaman.

Remedy Bulb Installation

•

Remove UV bulbs from inside of tub. Note: Don't touch the glass

section of the bulbs with your fingers as the oil left behind will

shorten the life of the bulb.

•

Remove the side panel on each side of the tub by opening the access

panel and removing the thumb screw to the rear of the cutout. You'll

also need to remove the side panel trim on the left side of the tub to

install the upper bulb. (See

instructions.)

•

Slide the UV bulbs into the Remedy Chambers behind the tub. It's

important to keep them parallel with the inside of the chamber to

prevent damaging the quartz tube inside.

•

Connect the cables coming off the rear most electrical box to the

bulbs.

• Thread the UV Bulb Retainer Plug located on the cable into the end

of the chamber. Fitting should be just snug enough to prevent it from

threading out as this fitting only serves to keep the bulbs from sliding

out of the tube. Overtightening will increase the likelihood of

accidently loosening the adjacent fitting when the bulbs are serviced

in the future.

CD0037

Solares

Smart Spa Installation Manual

Side Panel Trim Removal

-16-

for detailed

1121