Aqua Exclusive DRUM FILTER C-25 EVO Panduan Pemilik - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Penyaringan Air Aqua Exclusive DRUM FILTER C-25 EVO. Aqua Exclusive DRUM FILTER C-25 EVO 20 halaman.

Installing the Rinse Pump
It is important, however, that high-pressure hose/PVC pipe is used for this purpose.
The pump generates a pressure of 3 bar. Pressure peaks of 4 bar may occur during start-
up. Therefore do not use sewer & drain PVC.
The high-pressure pump itself must be placed in a moisture-free location below the water
level.
1. Place a flexible tee coupling (2) at the output (1) of the filter. One output of the tee cou-
pling is for the rinse pump (7) and the other serves as a passage to the pond pump.
2. Connect the output of the tee coupling to the rinse pump (7) and the rinse pump to the
spray tube (5).
Figure 9: Overview of the C-25 EVO with a rinse pump.
1. Filter outlet 4" (110mm)
2. Flexible Rubber Tee Coupling 4" (110mm)
3. PVC Reducer ring
4. Hose/PVC pipe to Rinse Pump Inlet
5. Spray Bar
6. Hose/PVC pipe from Rinse Pump Outlet to Spray Bar

7. Rinse Pump

Installation
Rinse Pump
Aqua Exclusive
13