AVPro Edge ConferX AC-CXMF62-AUHD Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pengalih Matriks AVPro Edge ConferX AC-CXMF62-AUHD. AVPro Edge ConferX AC-CXMF62-AUHD 6 halaman. 6 input, 2 output multi-format classroom/conference room matrix switcher

Halaman Cetak

buttons

• HDBT Output Select button - Toggles the active source for HDBT OUTPUT

• HDMI Output Select button - Toggles the active source for HDMI Output

buttoN Commands

• Enable/Disable "Auto-Switching" - Simply PRESS & HOLD the OUTPUT SELECT button for 4 seconds to toggle

"Auto-Switching"

• When the LED is flashing "Auto-Switching" is enabled.

• You can enable only one output to auto switch, or both - when both are enabled, they will be mirrored.

• EDID is ideally set from the Web Interface, but can be set from the front panel (will be walked through later in

the guide)

Controlling the Matrix:

Web Interface

• To connect to the Matrix Switch and access the Web interface:

• Connect the LAN port on the rear of the Matrix Switch into an active access point or router

• Make sure your computer is on the same network

• Open any web browser and type in the IP address of the Matrix Switch. *NOTE - The default IP address is:

192.168.001.239

NOTE: Use this area to route inputs to outputs