AVPro Edge ConferX AC-CXMF62-AUHD Panduan Memulai Cepat
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Beralih AVPro Edge ConferX AC-CXMF62-AUHD. AVPro Edge ConferX AC-CXMF62-AUHD 6 halaman. 6 input, 2 output multi-format classroom/conference room matrix switcher
AC-cxmf62-auhd
6 input, 2 output Multi-Format Classroom/Conference Room Matrix switcher
Quick Start Guide
The AC-CXMF62-AUHD is the ultimate switcher for connecting a variety of sources. HDBaseT, VGA, DisplayPort 1.2, and
HDMI allows for integration in almost any room where meetings take place. Simplifying class and conference rooms
farther with independent HDMI and HDBaseT output ports, allowing for distribution of video to a local monitor as
well as a presentation projector or display up to 100 meters away.
This quick start guide will be going through:
• INSTALLATION
• FRONT/REAR PANEL CONTROL
• EDID MANAGEMENT
• IR & RS-232 CONTROL
• LAN CONTROL
• TROUBLESHOOTING
Quick Installation:
1. Connect the HDMI/HDBT/VGA/DP1.2 input sources (PC, Wall Plate, etc...) to the AC-CXMFX62-AUHD.
2. Connect the HDMI/HDBT output devices (Display, Distribution Amplifier, Projector, Receiver) to the AC-
CXMFX62-AUHD.
3. Power on the sources.
4. Connect the power supply into the AC-CXMFX62-AUHD.
5. Turn on output devices/displays.
6. Use the front panel controls, supplied IR remote or free LAN (IP: 192.168.001.239) to control the matrix
Front Panel Control and commands: