Abatement Technologies PRED1200 Buku Petunjuk - Halaman 10
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pembersih Udara Abatement Technologies PRED1200. Abatement Technologies PRED1200 17 halaman. Portable air scrubber
Halaman Cetak
To Change the Optional Third Stage Filter:
1. Open the pre-filter access door.
2. Remove the third stage filter and replace it with a new one.
3
Close the door and lock it in position.
Note: If an optional Vapor-Lock® filter is being used, be sure to remove it from its poly bag before installing it in the
unit. Vapor-Lock® filters are packaged in poly bags to preserve the integrity of the carbon granules.
To Change the HEPA Filter:
1. Turn the unit "OFF" and disconnect the power cord from the electrical outlet.
2. Remove the screws that hold the HEPA filter access panel in place and set the panel aside.
3. Remove the wing nuts that secure the HEPA filter retaining bracket in place, slide the bracket off the long
filter retaining bolts and remove the HEPA filter.
4. Carefully place a new HEPA filter (part# H610C-99) into the cabinet, making sure that it rests on the curved
section of the cabinet base, which is just behind the long, lower filter retaining bolt. The foam seal of the
filter should be aligned with the exhaust outlet.
5. Place the HEPA filter retaining bracket over the retaining bolts and secure it in place with the wing nuts. Do
not over-tighten the wing nuts.
6. Re-attach the HEPA filter access panel and secure it to the cabinet with its screws.
Warning: Use only Abatement Technologies pre-filters, HEPA filters, and replacement parts. Substitute
parts void the warranty, jeopardize worker and environmental safety, and adversely effect engineered
performance levels.
9