Dell D19M Pengaturan dan Spesifikasi - Halaman 20

Jelajahi secara online atau unduh pdf Pengaturan dan Spesifikasi untuk Laptop Dell D19M. Dell D19M 30 halaman.
Juga untuk Dell D19M: Pengaturan dan Spesifikasi (20 halaman), Panduan Memulai Cepat (16 halaman), Panduan Pemilik (37 halaman), Panduan Pemilik (28 halaman), Pengaturan dan Kation Spesifik (27 halaman), Pengaturan dan Spesifikasi (18 halaman), Manual Pengaturan dan Spesifikasi (34 halaman), Pengaturan dan Spesifikasi (15 halaman), Pengaturan dan Spesifikasi (17 halaman), Manual (16 halaman)

Halaman Cetak
Dell D19M Pengaturan dan Spesifikasi
Table 22. Intel Software Guard Extensions
Option
Intel SGX Enable
Enclave Memory Size
Table 23. Performance
Option
Multi Core Support
Enable Intel SpeedStep
C States Control
Intel TurboBoost
Hyper-Thread Control
Table 24. Power Management
Option
AC Recovery
Enable Intel Speed Shift
Technology
Auto On Time
Deep Sleep Control
20
System setup
Description
Allows you to enable or disable the Intel Software Guard Extensions to provide a secured
environment for running code/storing sensitive information in the context of the main operating
system.
•
Disabled
•
Enabled
•
Software Controlled (default)
Allows you to set the Intel SGX Enclave Reserve Memory Size.
•
32 MB
•
64 MB
•
128 MB
Description
This field specifies whether the process will have one or all cores enabled. This option is enabled by
default.
Allows you to enable or disable the Intel SpeedStep mode of the processor. This option is enabled by
default.
Allows you to enable or disable additional processor sleep states. This option is enabled by default.
Allows you to enable or disable the Intel TurboBoost mode of the processor. This option is enabled by
default.
Allows you to enable or disable the HyperThreading in the processor.
•
Disabled
•
Enabled (default)
Description
Determines how the system responds when AC power is re-applied after a power loss. You can set
the AC Recovery to:
•
Power Off
•
Power On
•
Last Power State
This option is Power Off by default.
The option is enabled by default
Sets time to automatically turn on the computer. Time is kept in standard 12-hour format
(hour:minutes:seconds). Change the startup time by typing the values in the time and AM/PM fields.
NOTE:
This feature does not work if you turn off your computer using the switch on a
power strip or surge protector or if Auto Power is set to disabled.
Allows you to define the controls when Deep Sleep is enabled.
•
Disabled (default)
•
Enabled in S5 only