Dell PowerEdge 2800 Manualline Konversi - Halaman 15
Jelajahi secara online atau unduh pdf Manualline Konversi untuk Server Dell PowerEdge 2800. Dell PowerEdge 2800 36 halaman. Poweredge 2800 server
Juga untuk Dell PowerEdge 2800: Pembaruan Informasi (24 halaman), Panduan Instalasi (22 halaman), Manual (44 halaman), Instalasi Perangkat Keras (14 halaman), Referensi Cepat (2 halaman), Spesifikasi (2 halaman)
Halaman Cetak
Y1001bk0.book Page 13 Thursday, July 8, 2004 4:32 PM
Figure 1-5. Drive Tray in Maintenance Position
captive screw
drive tray
release lever
Remove the control panel assembly.
Orient the system as shown in Figure 1-6.
a
Disconnect the control panel cable from the SCSI backplane.
b
Inside the drive tray, open the control panel cable clamp. See Figure 1-6.
c
Using a #2 Phillips screwdriver, remove the three screws that secure the tower control
d
panel assembly to the front panel.
Slide the control panel assembly back away from the front panel and remove the assembly
e
and cable from the chassis.
NOTE:
While removing the control panel assembly, be careful not to damage the interface cable.
Tower-to-Rack and Rack-to-Tower Conversion Guide
13