Dell E2009W Panduan Servis - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Servis untuk Monitor Dell E2009W. Dell E2009W 49 halaman. Lcd monitor
Juga untuk Dell E2009W: Setup Manual (2 halaman), Panduan Pengguna (30 halaman)

Halaman Cetak

method as followe: plugging in the VGA/DVI cable, press "Menu" button to call out OSD Main Menu, Press "Plus

Key"to select"Other Settings Menu"then pop submenu and choose Factory reset.

Auto Color Balance (Automatically calibrate chip ADC parameter by using chip internal

DAC.)

5.1 If it is a new-built set, press "Auto/Plus" button to execute "Auto Color" at standard video pattern

pattern

5-MOSAIC

5.2 Please confirm the following steps to perform "Auto Color Balance":

- Connect the VGA cable with the standard video pattern generator and display

monitor.

- Press "Power" button to power off the monitor.

- Press "Menu" and "Auto/Plus" buttons simultaneously; then press "Power" button to power on the

monitor.

Press "Plus Key", select"Other Settings Menu" ,then Press "Plus Key"and choose factory at bottom

- Set BurnIn Mode item to ON, then execute Auto Color item.

- After the "Auto Color Balance" process finished, go back to "Other Settings Menu", and press "Factory Reset" to exit Factory

mode

Upgrade Firmware to Serial via Flash Cable by ISP_Tool V4.100.exe

7.1 Connect the monitor and PC follow Fig 11

Service Manual

pattern on the

5-MOSAIC