Dell POWER VAULT 130T LIBRARY 130T Panduan Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Penyimpanan Dell POWER VAULT 130T LIBRARY 130T. Dell POWER VAULT 130T LIBRARY 130T 13 halaman. Tape library
Juga untuk Dell POWER VAULT 130T LIBRARY 130T: Buklet Keselamatan (10 halaman)

Halaman Cetak

Loosen the two thumbscrews at the rear of the drive assembly.

Using both hands, remove the drive assembly from the drive slot, placing it on a flat,

stable surface.

WARNING: DO NOT apply power to the tape drive when it is outside of the

drive slot. To avoid damaging the drive, do not operate the load latch manually

while the drive is outside the library.

Replacing the Tape Drive Tray assembly

If you are replacing your drive with a new drive, unpack the assembly and inspect it for

damage such as bent, broken, or loose parts.

•

Verify that the tape drive model and serial numbers match those on the shipping

invoice. Labels on top of the drive show either DLT4000 or DLT7000.

•

Verify that required cables are present.

•

Report any damaged or missing items to your Dell representative.

WARNING: Do not touch any components on the power supply. Live voltage

could be present even though the unit is powered off.

Figure 3. Setting TermPwr

Drive Tray Assembly Conversion Instructions