AVYCON CAT6 Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Kamera IP AVYCON CAT6. AVYCON CAT6 2 halaman. Fixed turret camera
Juga untuk AVYCON CAT6: Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (2 halaman)

Halaman Cetak
Dome Cover
4.
Fix the dome cover back onto the mounting base by installing
the three dome cover screws into the camera and tightening it
once the position is secured.
5.
Ceiling Mounting complete.
6.
Bracket Adjustments
• With the dome cover removed, you can make adjustments to
the pan, tilt, and rotation of the camera lens and body to allow
for the best possible view for your application.
Pan 360°
Tilt:90°
Rotate: 360°
• Carefully slide the dome cover back onto the camera, then
secure it by screwing it in place.
Drywall Anchors
NETWORK CABLE SETUP
1
①
Loosen the nut from the main element.
②
Run the network cable (without RJ45 connector) through both
elements. Then crimp the cable with the RJ45 connector.
③
Connect the cable to the female portion of the waterproof connector,
then tighten the nut and the main cover.
Dome Cover Screws
PLEASE CONFIRM THAT VOLTAGE OF POWER SUPPLY USED MATCHES POWER
REQUIRED BY CAMERA, OTHERWISE PERMANENT DAMAGE OR RISK OF FIRE
NETWORK CONNECTION
Network Cable
IPC
① Make sure that the camera and the PC are connected to the local network.
② Install the IP Device Tool from the CD and run it after installation.
Note: DHCP is enabled by default.
6
2
3
CAUTION
MAY OCCUR
7
Switch
Network Cable
MENU
Computer
Router
③ Camera Activation: Click on the IP address of the camera you want to
activate, which will open that camera's system in your web browser.
Alternatively, if you already know the IP address of your camera, you
can manually enter it into the address bar of your web browser to
reach the same screen.
④
The first time you access the camera, you will be prompted to choose
a password that must be between 8 to 15 characters. Once you are
done, click on the 'OK' button to confirm your login information. The
camera is now activated.
⑤ After setting up your credentials, you can access the camera by
logging into the system with the password you just created.
RESOURCES
Need help?
1) Visit www.avycon.com
2) Search for the model number of your product.
3) Click on your product and find appropriate documents on product page.
Technical Support E-mail :
Technical Support Website :
www.avycon.com
US Helpdesk Number :
1 (949) 752-7606
Toll Free Number (Canada) :
1 (888) 833-4611
[M-F, 6am-5pm PST]
NETWORK IP CAMERA
8