Miele DA 230-2 Panduan Pengoperasian dan Instalasi - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Instalasi untuk Kap Ventilasi Miele DA 230-2. Miele DA 230-2 32 halaman. Cooker

Halaman Cetak

Before any cleaning or maintenance

work the cooker hood must be dis-

connected from the mains supply.

Ensure that:

– it is switched off at the fused spur

connection unit, or

– the mains fuse is withdrawn, or

– the screw-out fuse is removed, (in

countries where this is applicable).

Warning: The surfaces and controls

are susceptible to scratches and

abrasion. Please observe the follow-

ing cleaning instructions:

^ All external surfaces and controls can

be cleaned using warm water with a

little washing up liquid applied with a

soft sponge.

^ Wipe dry using a soft cloth.

Do not use too much water when

cleaning the controls. Water could

penetrate into the electronics and

cause damage.

Avoid:

– cleaning agents containing soda, ac-

ids or chlorides,

– abrasive cleaning agents, e.g. pow-

der cleaners or cream cleaners,

– abrasive sponges, e.g. pot scourers

or sponges which have been previ-

ously used with abrasive cleaning

agents.

These will damage the surface material.

Stainless steel surfaces can be cleaned

using a proprietary non-abrasive clean-

ing agent designed specifically for use

on stainless steel.

To help prevent re-soiling, proprietary

conditioning agents for stainless steel

can also be used.

Apply sparingly with an even pressure.

A microfibre "E-Cloth" is available from

the Miele UK Spare Parts Department,

Part Number 98013530, which is suit-

able for cleaning surfaces such as

stainless steel, glass, plastic and

chrome.

These controls may suffer discolour-

ation or damage if soiling is left on

them for too long.

Remove any soiling straight away.

Do not use stainless steel cleaning

agents on these types of controls.