Miele T 1323C CONDENSER DRYER Panduan Petunjuk Pengoperasian - Halaman 34
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pengering Miele T 1323C CONDENSER DRYER. Miele T 1323C CONDENSER DRYER 36 halaman. Large capacity vented dryers flat controls, stacked washer & dryer example combination
Juga untuk Miele T 1323C CONDENSER DRYER: Informasi Teknis (3 halaman), Dimensi Produk (12 halaman), Informasi Teknis (3 halaman), Petunjuk Instalasi (2 halaman)
Halaman Cetak
When drying is in progress, condensed
water is pumped into the condensed
water container through the drain hose
at the back of the dryer. The
condensed water can also be drained
directly if the machine is installed near
a sink or a stand pipe so that the
condensed water container does not
have to be emptied.
The drain hose (approx. 6 ft [2 m] long)
is stored in the dryer. It must be pulled
out of the dryer to its full extent to
ensure proper external draining.
Maximum delivery head: 4 ft (1.2 m).
If the hose is not long enough, an
extension hose is available as an
optional accessory from the Miele.
^ Unclip the drain hose, , and pull it
off the holder .
30
^ Unclip the drain hose, .
^ Pull the drain hose, to its full extent,
out of the dryer towards the left, ,
(see illustration).
it may be damaged!
^ Use the curved guide to prevent the
drain hose from becoming kinked
(see "Front view" illustration).
^ Secure the hose carefully, e.g. by
tying the hose to the water tap, to
avoid damage by overflowing water.
^ Insert the drain hose into the
Y-adapter of the sink.
the drain hose,