Miele Swing H1 Panduan Petunjuk Pengoperasian - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Penyedot Debu Miele Swing H1. Miele Swing H1 48 halaman.

Halaman Cetak

Miele Swing H1 Panduan Petunjuk Pengoperasian

If you would like to use an Active

AirClean or HEPA filter, see

"Exchanging exhaust filters".

^ Put the lid back on and close it.

Replacing the "Active AirClean" filter

or the "HEPA" filter (see fig. 29 + 30)

Make sure that only one exhaust

filter is installed.

^ Press the release button for the

exhaust filter compartment on the

rear of the vacuum cleaner and

remove the lid (see fig. 26).

^ Remove the used "Active AirClean"

filter or "HEPA" filter.

^ Insert the new "Active AirClean" filter

or "HEPA" filter.

If you would like to use an AirClean fil-

ter, see "Exchanging exhaust filters".

^ Put the lid back on and close it.

Exchanging exhaust filters

Depending on the model, one of the

following standard exhaust filters is

installed (see fig. 25).

a AirClean

b Active AirClean (SF-AAC 10)

c HEPA (SF-H 10)

All of the above filters are

interchangeable and the exhaust filter

supplied with the vacuum cleaner can

be exchanged with another type.

Make sure that only one exhaust

filter is installed.

The exhaust filters have different

features (see "Optional accessories").

When changing the filter

1. If you would like to replace filter a

with filter b or c it is essential that you

also remove the filter frame before

inserting the new type of filter.

2. If you would like to replace exhaust

filter b or c with filter a it is essential that

you install a filter frame * in the lid.

* Filter frame - see "Optional

accessories"

Removing or inserting the filter frame

(see fig. 31)

^ Grasp the sides of the filter frame at

the locations shown (see arrows) and

squeeze. The frame can now be

inserted or removed.

When to change the thread catcher

The thread catcher pads on the bottom

of the rug and floor tool should be

replaced as soon as they appear worn.

Changing the thread catcher

(see fig. 32 + 33)

^ Use a screwdriver or similar object to

remove the thread catcher pads from

the slots.

^ Press the new thread catcher into the

slots.

Spare parts may be obtained from from

any authorized Miele vacuum dealer or

Miele.