ALLNIC AUDIO HPA-3000GT Panduan Pemilik - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat ALLNIC AUDIO HPA-3000GT. ALLNIC AUDIO HPA-3000GT 6 halaman. Stereo headphone amplifier
SPECIFICATIONS FOR THE ALLNIC AUDIO HPA-3000GT
HEADPHONE AMPLIFIER
Inputs:
Headphone Output:
Pre Output
Frequency Response:
Voltage Gain:
Optimum Headphone
Impedance:
Output Wattage:
Maximum Input
Voltage:
THD
(Total Harmonic
Distortion):
S/N Ratio:
Power Consumption:
Tubes:
Fuse:
Dimensions:
Weight:
Unpacked:
Packaged:
One (1) pair unbalanced (RCA)
One (1) pair balanced(XLR)
Two (2) XLR 4 pin
Two (2) one-quarter inch (1/4")
For low and high impedance load
One pair of RCA pre output (10 Ohms)
20Hz ~ 20KHz (±0.3db)
+28dB
Low under 50 ohms
High under 600 ohms
Three (3) watts
Ten (10) volts RMS
Less than 0.03% (1KHz, Output 1V)
-68db (CCIR, 1KHz)
48 Watts
6EM7 X 2
AC 2A, 250V
240mm(~9.4inches) x 330mm
(~13 inches) x 175mm (~6.8
inches) (W x D x H)
10 Kg (~19.9 lbs)
12 Kg (~24.26 lbs)
WARRANTY
All Allnic Audio amplifier products are
warranted against materials and manufacturing
defects for parts, excluding tubes, and labour for
two (2) years from date of purchase. Tubes are
warranted against materials and manufacturing
defects for one (1) year from date of purchase.
The warranty is transferable for the balance of
the original purchaser's warranty period,
provided, as stated below, no unauthorized
repairs or modifications have been performed
on the product. Date of purchase is the date
indicated on the invoice for the product issued
by Audiomentors.
For the warranty to be valid, a defective product
must be returned to Audiomentors for service
prior to any unauthorized attempt to repair. Any
repair work on an Allnic Audio product not
specifically authorized by Audiomentors will
void the warranty on the product.
6