ABB ACH580-01 Series Petunjuk Manual - Halaman 6

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Peralatan Industri ABB ACH580-01 Series. ABB ACH580-01 Series 7 halaman. Base drive replacement
Juga untuk ABB ACH580-01 Series: Manual (16 halaman), Panduan Instalasi dan Start-Up Cepat (17 halaman), Petunjuk Manual (8 halaman), Panduan Instalasi dan Start-Up Cepat (17 halaman), Panduan Instalasi dan Start-Up Cepat (17 halaman)

REPLACEMENT INSTRUCTIONS | ACH580-01 VXR UL TYPE 1 , R2/R3/R4

Step

Instruction

R4 Frame: Secure input and motor wires to the conduit plate.

Reconnect the RS485 terminal block

secure with zip ties

Reconnect any control wiring removed in steps 4 and 5.

WARNING! This configuration does not support Safe Torque Off (STO)

functionality in bypass mode.

Place the top of the drive cover on first, then press down on the

bottom.

R3 & R4 Frame: Using a T20 bit, torque to 14 in-lb (1.5 Nm).

Place enclosure cover in place and secure using two (2) M4x16 screws

that were removed earlier.

Using a T20 bit, torque to 14 in-lb (1.5 Nm).

Power and reprogram the drive.

to EFB on control unit and

Diagram