Allo.com 4aCP1e Panduan Pemasangan - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pemasangan untuk Aksesori Komputer Allo.com 4aCP1e. Allo.com 4aCP1e 14 halaman. Digital card

Allo E1/T1 PRI Card Quick Installation Guide

3.3 Installation of Asterisk

Download the latest asterisk version from:

http://downloads.asterisk.org/pub/telephony/asterisk/

following command.

#wget

http://downloads.asterisk.org/pub/telephony/asterisk/asterisk-11-

current.tar.gz

Go to asterisk folder and compile the packages as following

To install asterisk give the following commands:

[root@pbx1 asterisk-11.4.0]#./configure

# make

# make install

# make config

If this is your first Asterisk Install, you should install the sample configuration files, to do this run:

# make samples

Add "alloPL4xxp" at the end of /etc/dahdi/modules file, so that while starting dahdi driver Allo

card modules will load automatically.

Add the line <include "dahdi-channels.conf"> in /etc/asterisk/chan_dahdi.conf

file.

By default the card is ready to use in E1 mode

To configure the card in T1 signaling mode, please add the following,

(i) Add "options alloPL4xxp default_linemode=t1"at the end of

/etc/modprobe.d/dahdi.conf

After Dahdi driver installation run the following commands

# /etc/init.d/dahdi start

www.allo.com

and extract the asterisk tar file by giving

Version 2.1