Alloy POEFE8TV3 Panduan Pengguna - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Router Jaringan Alloy POEFE8TV3. Alloy POEFE8TV3 13 halaman. Fast ethernet poe+ unmanaged switch
Halaman Cetak3.1 Installation Method
The site where you install the switch may greatly affect its performance. When installing,
please take the following into consideration.
-
Install the switch in a cool, dry place. See technical specifications for the acceptable
temperature and humidity operating ranges.
-
Install the switch on a secure, level surface that can support its weight, at least 5Kg.
-
Before connecting the Power Cord please ensure the appropriate voltage switch is
set, this switch can be found at the back of the POEFE8TV3.
-
Leave at least 10cm of space at the front and rear of the switch to ensure adequate
ventilation.
3.2 Desktop or Shelf Installation
When installing the switch on a shelf or desktop please ensure guidelines above are
followed, including level surface and adequate ventilation.
Rubber feet are supplied and can be applied to the bottom of the switch, please see diagram
below:
3.3 Rack Installation
The POEFE8TV3 is a rack mountable switch and can be installed in an EIA-19 based
equipment rack. First install the provided rack mount brackets onto each side of the switch
using the screws provided. Using the screws provided with your rack mount the switch into
your equipment rack.
Alloy Computer Products Pty Ltd Copyright ©2013
Fig. 1 Desktop installation
POEFE8TV3 User Manual