Miller 028042103 Panduan Pemilik - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pengelasan Miller 028042103. Miller 028042103 20 halaman.
Juga untuk Miller 028042103: Panduan Pemilik (20 halaman), Panduan Pemilik (20 halaman), Panduan Pemilik (20 halaman)

Halaman Cetak

� Read and understand the Safety Data Sheets (SDSs) and the

manufacturer's instructions for adhesives, coatings, cleaners, con-

sumables, coolants, degreasers, fluxes, and metals.

STEAM AND HOT COOLANT can

burn.

Hose may rupture if coolant overheats.

� Visually inspect condition of hoses before each

use. Do not use damaged hoses.

� Allow cooling period before working on equipment.

HIGH PRESSURE FLUIDS can injure

or kill.

� Coolant can be under high pressure.

� Release pressure before working on cooler.

1-4.

California Proposition 65 Warnings

WARNING – This product can expose you to chemicals in-

cluding lead, which are known to the state of California to

cause cancer and birth defects or other reproductive harm.

1-5.

Principal Safety Standards

Safety in Welding, Cutting, and Allied Processes, American Welding

Society standard ANSI Standard Z49.1. Website: http://www.aws.org.

Safe Practices for the Preparation of Containers and Piping for Weld-

ing and Cutting, American Welding Society Standard AWS F4.1 from

Global Engineering Documents. Website: www.global.ihs.com.

Safe Practices for Welding and Cutting Containers that have Held

Combustibles, American Welding Society Standard AWS A6.0 from

Global Engineering Documents. Website: www.global.ihs.com.

National Electrical Code, NFPA Standard 70 from National Fire Pro-

tection Association. Website:

www.nfpa.org

Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-

1 from Compressed Gas Association. Website: www.cganet.com.

Safety in Welding, Cutting, and Allied Processes, CSA Standard

W117.2 from Canadian Standards Association. Website:

csagroup.org.

OM-254203 Page 2

� If ANY fluid is injected into the skin or body seek medical help

� Reinstall doors, panels, covers, or guards when maintenance is

For more information, go to www.P65Warnings.ca.gov.

Safe Practice For Occupational And Educational Eye And Face Pro-

tection, ANSI Standard Z87.1, from American National Standards In-

stitute. Website: www.ansi.org.

Standard for Fire Prevention During Welding, Cutting, and Other Hot

Work, NFPA Standard 51B from National Fire Protection Association.

Website: www.nfpa.org.

OSHA, Occupational Safety and Health Standards for General Indus-

try, Title 29, Code of Federal Regulations (CFR), Part 1910.177 Sub-

part N, Part 1910 Subpart Q, and Part 1926, Subpart J. Website:

www.osha.gov.

and www.sparky.org.

OSHA Important Note Regarding the ACGIH TLV, Policy Statement

on the Uses of TLVs and BEIs. Website: www.osha.gov.

Applications Manual for the Revised NIOSH Lifting Equation from the

National Institute for Occupational Safety and Health (NIOSH). Web-

site: www.cdc.gov/NIOSH.

www.

Cooler 2020–02

immediately.

MOVING PARTS can injure.

� Keep away from moving parts such as fans.

� Keep all doors, panels, covers, and guards closed

and securely in place.

� Have only qualified persons remove doors, panels,

covers, or guards for maintenance and troubleshooting as

necessary.

finished and before reconnecting input power.