AllSee LHDS Pengaturan - Halaman 6

Jelajahi secara online atau unduh pdf Pengaturan untuk Rak dan Dudukan AllSee LHDS. AllSee LHDS 12 halaman.

Step 4

Attach the inner rods to the base, in the centre of the "C" Parts (see Figure 4).

Note: There will be 2 holes on either side of both of these inner rods. The holes on one side are

for standard screws, whereas the holes on the other side will have a larger area around the screw

holes for large-headed screws. The standard screw holes should face the "E" Parts and the large-

headed screw holes should face the "D" Parts. For this reason, the inner rods need to be attached

opposite ways round so that the security poles (Parts "D" and "E") can be attached correctly.

Figure 4