Miller XT30i Panduan Pemilik - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Pengelasan Miller XT30i. Miller XT30i 44 halaman.

Halaman Cetak
Miller XT30i Panduan Pemilik

4-2. Duty Cycle And Overheating

3-1/2 Minutes Cutting
Overheating

4-3. Power Source Dimensions And Weight

Dimensions And Weight
12.5 kg (27.6 lb)
including torch

4-4. Torch Dimensions And Weight

1.0 kg (2.2 lb)
.
A complete Parts List is available at www.MillerWelds.com
35% duty cycle
6-1/2 Minutes Resting
0
15
Minutes
362 mm
(14-1/4 in.)
30 mm
(1-3/16 in.)
38mm
(1-1/2 in.)
Reduce Duty Cycle
210 mm
(8-1/4 in.)
286 mm
(11-1/4 in.)
222 mm
(8-3/4 in.)
Duty Cycle is percentage of 10 min-
utes that unit can cut at rated load
without overheating.
If unit overheats, thermostat(s)
opens, output stops, Temperature
trouble light goes On, and cooling
fan runs. Wait fifteen minutes for
unit to cool or temperature light to
go off. Reduce amperage or duty
cycle before cutting or gouging.
NOTICE − Exceeding duty cycle
can damage unit and void warranty.
A
OR
sduty1 5/95 / Ref. 244 405-A
!
Do not move or operate unit
where it could tip.
loc_2 3/96 - Ref. 244 405-A
Ref. 253 554-A
OM-256 118 Page 15