Color Fixed Dome Network Camera with MPEG-4 and JPEG
dual streaming, PoE, and 3.6x Varifocal lens
Key Features
• MPEG-4/JPEG digital signal output at VGA image size with up to 30 ips
• MPEG-4 and JPEG dual stream output for simultaneous real time
monitoring and high resolution recording
• Progressive output provides clear images, even when the subject is moving.
• High sensitivity: 1.5 lux at F1.3 (Wide)
• Electronic sensitivity enhancement: Auto (Up to 16x) / OFF
• Electronic shutter for anti flicker
• 2.8 ~ 10 mm, 3.6x Varifocal Auto Iris lens
• VMD (Video Motion Detector) with 4 programmable detection areas
and 6 sensitivity levels
• Meta data for VMD is supplied to work with the WJ-ND400 playback
VMD function.
• Monitor output for easier installation
• Up to 3x digital zoom controlled by browser
• Camera title display: Up to 20 alphanumeric characters on browser
• SD Memory card slot for alarm recording and backup upon network
failure. Recorded data can be downloaded by using FTP command.
• Alarm sources including Terminal input, VMD and Panasonic alarm
command can trigger actions including SD memory recording/FTP
image transfer, E-mail notification, Alarm indication, Terminal output
and Panasonic protocol output.
• Built-in microphone for audio (1-way)
• Built-in network interface (10Base-T / 100Base-TX)
• Power over Ethernet (PoE) IEEE 802.3af.
• Multiscreen: Images from 8 cameras can be displayed in 2 separate Quad
screens (JPEG only). 20 characters camera title is available for each camera.
• FTP client function enables periodic image data transfer or transfer
upon alarm.
• Alarm e-mail notification
WV-NF284
(24 V AC, 12 V DC or PoE)
• Max. bit rate/client (64 / 128 / 256 / 512 / 1,024 / 1,536 / 2,048 / 3,072 /
4,096 kbps) or frame rate priority mode (4,096 kbps / Unlimited) for MPEG-4
and Total bit rate control (64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 kbps /
Unlimited) allowing flexible network management.
• Supported Protocol: TCP/IP, UDP/IP, HTTP, RTSP, RTP,
RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP
• Internet mode: MPEG-4 images can be transmitted over HTTP protocol.
• Multi-language GUI and setup menu: English, French, Italian, Spanish, German,
Russian (PAL) / English, French (NTSC)
Standard Accessories
• CD-ROM* ...................................... 1 pc.
• Installation Guide (English version) .... 1 pc.
The followings are for the installation.
• Power cord plug ........................... 1 pc.
• External I/O terminals plug .......... 1 pc.
• Code Label ................................... 1 pc.
• Camera mount bracket ................. 1 pc.
• Camera fixing screw (M3 x 6)
................... 2 pcs. (incl. a spare screw)
Optional Accessories
Smoke Dome Cover
WV-CF4S
Color Fixed Dome
Network Camera
WV-NF284
WV-NF284
(24 V AC, 12 V DC or PoE)
* Installation required except for English
• Dome cover fixing screw
(tapping screw, nominal diameter: ø2.6 mm)
................... 2 pcs. (incl. a spare screw)
• Monitor output (3.5 mm mini jack) -
BNC conversion cable .................. 1 pc.
• Cable tie ........... 2 pcs.(incl. a spare tie)
* Panasonic IP setting software, the viewer
software and the operating instructions (PDF)
are included on the CD-ROM.
Embedded Ceiling Mount Bracket
WV-Q167