Panasonic WV-SC386 Panduan Instalasi - Halaman 26

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Camcorder Panasonic WV-SC386. Panasonic WV-SC386 36 halaman. Ip video cameras
Juga untuk Panasonic WV-SC386: Spesifikasi (2 halaman), Catatan Integrasi (8 halaman)

Halaman Cetak

Configure the network settings

Configure the network settings of the camera using the Panasonic IP setting

software

It is possible to perform the network settings of the camera using the IP setup software on the provided CD-ROM. When

using multiple cameras, it is necessary to configure the network settings of each camera independently.

If the Panasonic IP setting software does not work, configure the network settings of the camera and the PC individually on

the "Network" page of the setup menu. Refer to the Operating Instructions (included in the CD-ROM) for further informa-

tion.

IMPORTANT:

• When using Microsoft Windows 7 or Microsoft Windows Vista, the "Windows Security Alert" window may be displayed

when starting the IP setup software. In this case, disable "User Account Control" from the control panel.

• For the security enhancement, the MAC address/IP address of the camera to be configured will not be displayed when

around 20 minutes have passed after turning on the power of the camera. (When the effective period is set to "20min"

in the IP setup)

However cameras in the initial set mode are still displayed even after 20 minutes.

• Panasonic IP setting software is inoperable in other subnets via the same router.

• This camera cannot be displayed or set with an older version of the IP setup software (version 2.xx).

T o start the Panasonic IP setting software, click the [Run] button next to [IP Setting Software] from the CD launcher

menu window, or double-click on the shortcut icon created after installing the software on the PC.

• The License Agreement will be displayed. Read the Agreement and choose "I accept the term in the license agree-

ment", and click [OK].

C lick the [Network Settings] button after selecting the MAC address/IP

address of the camera to be configured.

Note:

• When using a DHCP server, the IP address assigned to the camera can be displayed by clicking the [Search] button of

the IP setting software.

• When a duplicate IP address is used, the corresponding camera number will be displayed shaded.

• When the [Access Camera] button is clicked, live images of the selected camera will be displayed.

• It is possible to change the "Camera list" display between IPv4 addresses and IPv6 addresses in accordance with the

protocol in use.

• The information displayed can be sorted by clicking the title of each displayed item.