AquaSure AS-F120PS Panduan Pemilik - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem Penyaringan Air AquaSure AS-F120PS. AquaSure AS-F120PS 12 halaman. Whole house

INSTALLING THE SYSTEM

IMPORTANT! Locate and test the main water supply valve to the housing before installing

the system. If the main water supply valve fails to shut off the water completely during the

test, we recommend contacting your local plumber to fix the valve before begin installing the

system.

WARNING! If this system is install in a metal (Conductive) plumbing system, i.c. copper or

galvanized metal, the plastic components of the system will interrupt the continuity of the

plumbing system. As a result, any arrant electricity from improperly grounded appliances

downstream or potential galvanic activity in the plumbing system can no longer ground

through contiguous metal plumbing. Some homes may have been built in accordance with

building codes, which actually encouraged the grounding of electrical appliances through

plumbing. A grounded "jumper wire" bridging the equipment and reestablishing the

contiguous conductive nature of the plumbing system must be installed prior to your system

use.

Note: although not required, but we highly recommend installing a bypass before the system

install to help ensure there's no downtime for water usage during repairs or replacement of

systems. See Diagram A for Bypass installation

Diagram A

SHUTOFF VALVE 2

SHUTOFF VALVE 1

SHUTOFF VALVE 3

Tel: 1-800-661-0680