Aquathem 16404-10 Panduan Instalasi - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pemanas Kolam Renang Aquathem 16404-10. Aquathem 16404-10 12 halaman. Swimming pool solar heating systems
Halaman Cetak2A
The Optional Supplemental System Isolation Kit
(Part #12033-5) includes a 1 1/2" - 2" PVC union ball
valve and a 1 1/2" -2" PVC check valve to permit manu-
al isolation of the solar system from the pool or spa fil-
tration system. Use one (1) kit per system.
3
Hold-Down Strap is required to secure collectors to
the mounting surface. Use strap 10035-1 (54') for rows of
up to 6 collectors or strap 10035-2 (107') for rows of up to
12 collectors. Available in bulk, 1400 ft. roll. Part #10040.
4
The Add-A-Row Kit (Part #12043-1 for 1 1/2" kit; #12043-
2 for 2" kit) is used when more than one row of collectors is to
be installed. Use one (1) kit for each collector row after the first.
Part No Qty 1 1/2" Qty 2"
Description
__
10003-1
1
Vacuum Relief Valve
10003-2 __
1
Vacuum Relief Valve
__
10008-1
1
Outlet header hold-down bracket assembly
10008-2 __
1
Outlet header hold-down bracket assembly
10011
4
4
Hold-down strap clamp assembly
__
30061-1
1
End cap
30061-2 __
1
End cap
__
30089-1
2
Pipe adapter
30089-2 __
2
Pipe adapter
50006
2
2
Hold-down strap bracket
__
60649-1
2
System connector hose (7" long)
60649-2 __
2
System connector hose (7" long)
__
60546-1
4
Hose clamp, stainless steel
60546-2 __
4
Hose clamp, stainless steel
5
The Row Spacer Kit (Part #12017-1 for 1 1/2" kit; #12017-2
for 2" kit) is used when a row of collectors must be interrupted by
a space to allow for obstructions such as a chimney or roof vent.
It contains the hardware needed to space around any width
obstructions by connecting appropriate lengths of PVC pipe to
the pipe adapters at the inlet and outlet headers of the two col-
lectors on either side of the obstructions. Use when required.
Part No Qty 1 1/2" Qty 2"
__
10008-1
1
10008-2 __
1
10011
4
4
__
30089-1
4
30089-2 __
4
50006
2
2
__
60648-1
2
60648-2 __
2
__
60546-1
4
60546-2 __
4
6
Double Hole Outlet Header Bracket (Part #50069) may
also be used to terminate a strap run in high wind areas where
extra hold-down strength is required.
7
Aluminum Mounting Bracket & Header Clamp Assembly
The Aluminum Header Clamp Assembly (Part #30171-1 for
1 1/2" only) is used as supplemental outlet header mounting in
conjunction with the Outlet Header Hold-Down Bracket assembly
(Part #10008-1). The bracket is designed for installations that
require more flexibility for the outlet header mounting hardware
location, such as barrel tile roofs or installations that require addi-
tional mounting hardware to be anchored into rafters or beams.
The Aluminum Header Clamp Assembly (Part #10117-1 for
1 1/2"; #10117-2 for 2") is used the same as the Aluminum
Header Bracket (Part #30171-1) and allows for collector
replacement without disturbing the roof penetrations.
3
Description
Outlet header hold-down bracket assembly
Outlet header hold-down bracket assembly
Hold-down strap clamp assembly
Pipe adapter
Pipe adapter
Hold-down strap bracket
Collector connector hose (3 3/4" long)
Collector connector hose (3 3/4" long)
Hose clamp, stainless steel
Hose clamp, stainless steel