Aquatic AQ-BC-6BT Panduan Pengguna & Instalasi - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna & Instalasi untuk Pemutar Media Aquatic AQ-BC-6BT. Aquatic AQ-BC-6BT 13 halaman. Hide-away media player for bluetooth audio & mp3 devices
Juga untuk Aquatic AQ-BC-6BT: Panduan Pengguna & Instalasi (16 halaman), Panduan Pemilik (11 halaman), Panduan Pengguna & Instalasi (14 halaman)

Halaman Cetak

Getting Started

1.2.1 Connections Diagram

1.3 12-pin Harness Connection (retail packaged models only)

If your AQ-BC-6BT was purchased from an Aquatic AV dealer and/or supplied with retail

packaging it is supplied with the Aquatic AV universal harness AQ-UNH-2 in order to connect the

media player to power and speakers. Please proceed to section 1.3.1.

If your AQ-BC-6BT was supplied as a pre-installed waterproof entertainment system it will utilise

3rd party wiring connections and is not supplied with the Aquatic AV 12-pin Harness. Please

proceed to section 1.4

1.3.1 12-pin Harness Wiring Diagram

All open wire connections should be soldered and protected against water and dust for best long-term performance.

*Retail packaged models only.

www.aquaticav.com

8. Power Attenuation Wires (1x white, 1x black)

7. Bluetooth Halo Aerial

Connector

No lower than a 2 Ohm load should be used

or damage may occur to the Media Player.

Make sure the polarity of speakers are

connected correctly.

BlueCube Media Player AQ-BC-6BT

2. RCA Auxiliary Inputs

1. 12-pin Watertight Harness

3. RCA Auxiliary Outputs

4. Wired & Wireless Remote 8-pin DIN

Connectors (Black)

5. 12V DC Triggers (2x red, 2x red/black)

6. Power On LED