Aquatic MP6 Panduan Pengguna & Instalasi - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Pengguna & Instalasi untuk Peralatan Kelautan Aquatic MP6. Aquatic MP6 20 halaman. Basic din series stereo
Halaman Cetak
Audio & Settings Menus
7.1 Audio Menu
1. Press the AUDIO/MENU button to enter the Audio menu. The available
Audio options are:
BASS - TREBLE - BALANCE - FADER - BEEP - EQ - LOUD
2. Turn the Rotating Selector to navigate the menu options.
3. Press the Rotary Selector to open the desired Audio option or confirm
changes to the Audio settings.
Any changes made in the Audio menu are system wide and will affect all modes.
7.1.1 Beep Tone
The beep tone plays when any button is pressed and can be switched on and
off from this selection.
7.1.2 EQ
The MP600 stereo is equipped with an audio DSP (Digital Signal Processor)
to provide preset listening experiences for different music types. If you have
chosen a preset equalizer setting (Flat, Rock, Classic, or Pop) the previous
Bass & Treble settings will be overridden.
7.1.3 Loudness
Increases the sound output level by
15dB.
7.2 Settings Menu
1. Press and hold the AUDIO/MENU button to enter the Settings menu. The
available Settings options are:
DIM H/L - PRI INFO/CLK - P-VOL - AREA USA/EUR - LOC ON/OFF -
STEREO/MONO - CLOCKSET - BT OFF/LINK - RESTORE
2. Turn the Rotating Selector to navigate the menu options.
3. Press the Rotary Selector to open the desired Audio option or confirm
changes to the Audio settings.
Any changes made in the Audio menu are system wide and will affect all modes.
7.2.1 Dimmer High/Low
Adjust the display brightness from 100% for normal operation to 30%
brightness to reduce screen glare during night time operation.
14
MP600: MP6 Basic DIN Series Stereo
www.aquaticav.com