Panasonic SA-AK580 Panduan Petunjuk Pengoperasian - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Sistem stereo Panasonic SA-AK580. Panasonic SA-AK580 20 halaman. Cd stereo system
Juga untuk Panasonic SA-AK580: Panduan Petunjuk Pengoperasian (20 halaman)

Halaman Cetak
Panasonic SA-AK580 Panduan Petunjuk Pengoperasian

Using the timers

Setting the clock
Setting the clock
This is a 24-hour clock.
1
Press [CLOCK / TIMER] to select "CLOCK".
Each time you press the button:
CLOCK
Original display
2
(
Within 8 seconds or so
Press [4 / 1] or [¡ / ¢] to set the time.
3
Press [CLOCK / TIMER] to fi nish setting the time.
Displaying the clock
Press [CLOCK / TIMER] once when the unit is on or in standby
mode.
The time is displayed for a few seconds.
Note:
Reset the clock regularly to maintain accuracy.
Using the play or record timer
Using the play or record timer
You can set the timer to come on at a certain time to wake you up
(play timer) or to record from the radio or the other equipments
(record timer).
Play timer and record timer cannot be used together.
Turn the unit on and set the clock.
Play timer
Prepare the music source you want to listen to;
disc number (1 to 5), radio, USB device or other
equipments and set the volume.
Record
Insert the USB device and tune to the radio station
\
timer
(
page 11) or select the music port or AUX source
\
(
page 17).
1
Press [CLOCK/TIMER] repeatedly to select the timer
function.
CLOCK
Original display
˚PLAY : to set the play timer
˚REC : to set the record timer
(Proceed to the next step
2
Press [4 / 1] or [¡ / ¢] to set the starting time.
Start time
Play timer indicator
3
Press [CLOCK / TIMER] to confi rm.
4
Repeat steps 2 and 3 to set the fi nishing time.
Finish time
RQTX0266-M_en.indd 15
RQTX0266-M_en.indd 15
˚ PLAY
˚ REC
)
˚ PLAY
˚ REC
)
within 8 seconds
Record timer indicator
To activate the timer
5
Press [ ˚PLAY/REC] repeatedly to turn on your desired
timer.
˚ PLAY
˚ REC
6
Press [y] to turn off the unit.
The unit must be turned off for the timers to operate.
Change the
Repeat steps 1 to 4 and 6 (
settings
above).
1) Press [ ˚PLAY/REC] to clear the timer
Change the
source or
indicator from the display.
volume
2) Make changes to the source or volume.
3) Perform steps 5 and 6 (
Check the
Press [CLOCK/TIMER] repeatedly to select
˚PLAY or ˚REC.
settings
Press [ ˚PLAY/REC] to clear the timer
Cancel
indicators from the display.
If you use the unit after the timers are set
After using, check that the correct disc is loaded before turning the
unit off.
Note:
• The play timer will start at the preset time with volume increasing
gradually to preset level.
• The record timer will start 30 seconds before the set time with the
volume muted.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning,
the fi nish time setting will not be activated.
Using the sleep timer
Using the sleep timer
This function enables you to turn off the unit automatically after the
set time.
Press [SLEEP] repeatedly to select your desired time.
30 MIN
60 MIN
90 MIN
Sleep timer indicator
To cancel
Press [SLEEP] repeatedly to select "OFF".
Changing the remaining time
Press [SLEEP] to show the remaining time and press [SLEEP]
again to select your desired time.
Note:
• The play and sleep timer or the record and sleep timer can be
used together.
• The sleep timer always has priority. Be sure not to overlap timer
settings.
No display (off)
\
see left and
\
see above).
120 MIN
OFF
RQT8043
4/20/09 10:02:45 AM
4/20/09 10:02:45 AM
15