Alpha Design Labs GT40 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Konverter Media Alpha Design Labs GT40. Alpha Design Labs GT40 15 halaman. Usb dac

ADL GT40 USB DAC

Functions and Part names

①

Power Switch

②

Phono/Line USB switch: for switching between USB input or Phono/Line input

③

Headphone Jack

④

Volume Control （1.Playback volume control. 2.Headphone volume control）

■ Rear Panel

⑤

Phono (MM/MC) and Line Switch: Switches between analog inputs, line or phono moving magnet

cartridge and phono moving coil cartridge.

CAUTION: Do not switch between settings during playback or while the GT40 is

switched on. Doing so may damage speakers.

⑥

USB Connector: Hook to USB connector on your computer.

※The Phono/Line or USB selector switch on the front panel must be set to USB for the GT40

to receive signal from the computer.

⑦

Phono/Line Level L/R RCA Analog Inputs: Connect to external analog sources

⑧

Phono/Line Level L/R RCA Analog Outputs: Connect to L/R amplifier inputs

⑨

Earth/Ground Terminal: Connect Phono cable ground wire to reduce noise

⑩

AC Input: Connect GT40 AC Adaptor / Rating: AC 9V 0.5A