Alphacom a300 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon Alphacom a300. Alphacom a300 20 halaman. Range headsetphone

Halaman Cetak

Utilisation of Controls

The button functions are as follows:

0 - 9

* - #

Recall

Save

Tone

Redial

pause

Store

Mute

(on handset)

Latchable Mute

Headset

Auto Redial

Time

Shift

Set

LCD

Speaker

Auto Redial

The switch functions are as follows:

Ring Vol

Ring pitch

ELR/TBR

pulse/Tone

Store On/Off

Message Waiting

Vol. (Slide)

Visual Indicators: Ring -

Message Waiting

Headset Socket

Dialing digits.

Dialling codes for MF signalling

For use on pBX or for star services

Used to store the last number in a memory

Switches from Loop Disconnect to DTMF during dialling

Last number redial

Insert a pause in the dial sequence

Used to store a telephone number in memory

To prevent the other party from hearing you (ie. push (on

handset) down to mute) or, alternatively, on specially adapted

models this can be amended to push-to-speak. In this

instance, the phone will be clearly marked as such.

To prevent the other party from hearing you (i.e. push (on

base) to mute). LED will illuminate when in use. push button

again to continue normal (two-way) conversation.

To enable headset operation, LED will illuminate when in use.

Activates re-dialling to a previously engaged number.

You can check the last number dialled and the conversation

time.

To select memories 11-20.

Use to set clock

Use to set LCD Display Contrast

To enable handsfree dialling, LED will illuminate when in use.

10 times Auto Redial (operate with batteries installed).

Allows you to set the level of the ringer loudness

Allows you to set the pitch of the ringer

Sets the Recall to Earth (ELR) or Timed Break (TBR) Recall

Sets signalling (dialling) to Loop Disconnect (LD) or DTMF(MF)

Allows you to protect numbers stored in memory location

- Sets the message waiting to 4 or 6 line configuration

Allows you to set the headset and speaker volume.

This indicates an incoming call by lighting up.

Operates where pABX message waiting is operational

Used to connect the headset (not supplied)